DIS Sensors CAN Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DIS Sensors CAN. DIS Sensors CAN 18 pages. Inclination safety sensor

Imprimer la page

CAN User Manual

Inclination Safety Sensor

(Type D) V2.0

Introduction

This manual is only valid for CAN Open safety inclination sensor (D-type inclination sensors)

DIS CAN Open safety inclination sensor (D-type) family overview:

• Three housing types: 60x50mm plastic or aluminium (QG65), 70x60 stainless steel (QG76)

• Three inclination devices: Inclination 1-axis (vertical plane) 1x ±180°

• Inclination 2 axis (horizontal plane) 2x ±30°

• Inclination 2 axis (horizontal plane) 2x ±90°

• Various CAN settings can be configured according to the CAN Open standard

• Various Sensor-settings can be configured via CAN Open

• CAN Device Profile CIA410 V2.0.0 is supported

• EDS files are available

• CRC calculation tool is available (2 different CRC calculations available, check your firmware version first)

Quick Reference Guide

• Hexadecimal figures will have suffix "h" in this manual

• CAN hardware interface: CAN2.0 A and B (complies to ISO11898-1&2)

• CAN communication profile: CAN Open (complies to CiA301 version 4.2.0 & EN50325-4)

• CAN device profile: CiA410 DSP 2.0.0 for inclinometers

• Baud-rate: default 125 kbit/s (can be set to 10, 20, 50, 125, 250, 500, 1000 kbit/s)

• Node-ID: default 01h (possible range 01h – 7Fh, so max. 127 nodes)

• Event time: default 50ms for TPDO1 and TPDO2 (range 10ms – 5000ms)

• TPDO1 output: 180h + node-ID (181h for node-ID 1). Default 'off'

• TPDO2 output: 280h + node-ID (281h for node-ID 1). Default 'off'

• SRDO1 normal: 0FFh + 2*node-ID (101h for node-ID 1).

• SRDO1 inverse: 100h + 2*node-ID (102h for node-ID 1).

• Byte-sequence on CAN-bus: little-endian (least significant byte first)

• Negative values: two's complement

• Two modes of operation: Event-mode (periodically autonomous messages) & Sync-mode

• Sync-mode: default disabled for TPDO1 and TPDO2

• Heartbeat: default off.

• Vendor-ID DIS: 000001BDh (index 1018h sub index 01h)

• Firmware-version available via CAN Object Dictionary (index 1018h sub index 03h)

• Serial number available via CAN Object Dictionary (index 1018h sub index 04h)

• Pre-set/zero adjustment available via CAN Object Dictionary (index 300Fh sub index 01h)

• Sample rate g-sensor-chip: 1600 Hz. Averaging during event-time TPDO1

• Input filter: Fixed 32 taps 45dB suppression (low-pass cut off freq. 20 Hz).

• Output filter: adjustable high- or low-pass filter 1st order. Controlled by CAN object 300Eh.

• Document data-types definition:

Unsigned 8-bits number (0 - 255)

U16 Unsigned 16-bit number (0 - 65535)

U32 Unsigned 32-bit number (0 - 4294967295)

Signed 8-bits number (-128 - +127) (also known as 'Integer 8')

S16

Signed 16-bits number (-32768 - +32767) (also known as 'Integer 16')

S32

Signed 32-bits number (-2147483648 - +2147483647) (also known as 'Integer 32')

Page 3 of 18