Disaster Area Designs Qconnect Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Disaster Area Designs Qconnect. Disaster Area Designs Qconnect 16 pages. Multi output midi controller

Imprimer la page

xample

You can hook up a huge variety of devices to the qCONNECT. While it's impossible for us to cover

every type of setup, here are a few examples to give you some ideas.

4 CHASE BLISS AUDIO PEDALS

Connect using TRS (stereo) cables from ports A, B, C, D to the TAP / MIDI or A / MIDI jacks.

DEV = DEVD

DEVA = CBA

CFG.A = RING

MERIS, CHASE BLISS, AND ALEXANDER

Connect using TRS (stereo) cable from port B the Chase Bliss TAP / MIDI or A / MIDI jacks.

Connect using TS (mono) cables from ports A and C to the Meris EXP / MIDI and Alexander MultiJack.

DEV = DEVC

DEVA = OTTO*

CFG.A = TIP

*Use OTTO for Meris Ottobit Jr., Enzo, or Polymoon. Use MRC7 for Mercury 7.

CHASE BLISS, ALEXANDER, EMPRESS

A 01

Connect using TRS (stereo) cable from ports A and B to the Chase Bliss TAP / MIDI or A / MIDI jacks.

Connect using TS (mono) cables from ports C and D to the Alexander MultiJack Empress CTL jack.

DEV = DEVD

DEVA = CBA

CFG.A = RING

*Use EMPR for Empress Reverb or EECO for Empress Echosystem

onfigurations

A 01

DEVB = CBA

CFG.B = RING

A 01

DEVB = CBA

CFG.B = RING

DEVB = CBA

CFG.B = RING

DEVC = CBA

CFG.C = RING

DEVC = ALEX

CFG.C = TIP

DEVC = ALEX

CFG.C = TIP

DEVD = CBA

CFG.D = RING

DEVD = EMPR*

CFG.D = TIP