ABBA TSRPT600 Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ABBA TSRPT600. ABBA TSRPT600 9 pages.

To connect the wires to the transformer, please carefully follow these step-

by-step instructions:

Locate the "COM" block terminal on the transformer. This terminal is

designated for the common wire connection. Rotate the screw in counter

clockwise to loosen it.

Take the first wire and insert it into the "COM" block terminal. Ensure that the

wire is fully inserted and securely positioned within the terminal.

Identify the "15V" block terminal on the transformer. This terminal is intended

for the connection of the other wire.

Insert the second wire into the "15V" block terminal, ensuring a secure and

complete insertion within the terminal.

Once both wires are correctly positioned in their respective block terminals,

locate the screw associated with each terminal block.

Using gentle pressure, tighten the screw to secure the wires in place. Confirm

that the levers are fully engaged and that the wires are firmly held within the

block terminals.

After connecting the wires to the terminal blocks, it is vital to verify that they are

securely and properly positioned. Follow these steps to ensure a secure

connection and complete the installation:

1.Carefully inspect the terminal blocks to confirm that the wires are fully inserted

and tightly secured within their respective terminals. Make sure there are no loose

or exposed wires.

2.Gently tug on each wire to ensure it is firmly held in place and does not come

loose. This step helps verify the stability of the connections.

3.Once you have confirmed the secure placement of the wires, proceed to close

the casing of the transformer. Align the casing properly with the unit.