Disc Makers Reflex1 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Disc Makers Reflex1. Disc Makers Reflex1 12 pages. Dvd
Également pour Disc Makers Reflex1 : Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur (6 pages), Manuel de l'utilisateur (9 pages)

Setup Guide

I. Setup USB 2.0 device(s)

For first time use

1. Turn your duplicator off if it is running.

2. Turn your computer off if it is running.

3. Set the IEEE 1394 Firewire/USB2.0 switch to "ON" at the back of your duplicator.

4. Using the standard USB 2.0 cable to connect your computer and your duplicator.

5. Turn on your duplicator.

6. Turn on your computer.

7. Your computer will recognize an external device.

You need to reboot your duplicator every time when you want to turn on/off the USB

2.0/Firewire Device(s).

Menu Overview:

Copy Disc

This process will copy your master disc into a blank disc simultaneously. . However, due to

its simultaneous nature, a master in good conditioned and lower recording speed may be

necessary for high success rate and quality duplicates.

For more information, please refer to "Tutorial Guide I – Make Disc-to-Disc Copies"

Test Copy Disc

This menu will guide you to simulate the duplication process. During the simulation process,

most write once recordable discs such as (DVD-R, CD-R) will be reusable. DVD+R blank

media will not be reusable. The purpose of performing such simulation is to ensure error

free duplication.

- 8 -