Disc Makers Reflex1 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Disc Makers Reflex1. Disc Makers Reflex1 9 pages. Dvd
Également pour Disc Makers Reflex1 : Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur (6 pages), Manuel (12 pages)

Imprimer la page

The Reflex1 DVD is a high performance DVD/CD-R one to one disc duplicator

designed for both the novice and professional user. The Reflex1 DVD is

designed for a variety of applications that require the exchange of audio, video

or data content. The following is a User Guide that outlines the menu com-

mands of the unit and immediate functions of the unit. For additional technical

support please call 888-800-4041.

GETTING STARTED

Carefully remove the DVD duplicator from its shipping container. Please inspect

the contents and verify them against the packing slip. Be sure to report any

errors in shipping immediately to Disc Makers.

Packing materials: Please save the original box and packaging in the event the

unit requires future service or you need to move the unit from one location to

another. This will help reduce the possibility of damage in transit.

Please Note: Any item that needs to be returned for a warranty repair must be

returned in original packaging.

NSTALLATION AND

ETUP

1. Unpack the Reflex1 DVD to a clean and cool work area. Keep the external

packaging for future storage and transportation.

2. Place the unit on a flat, clean and dust free surface.

3. Connect the power cord from the back of the unit to an electrical outlet. Do

not bypass the Ground.

4. The Front panel should appear as below.

1-800-237-6666

UNCTIONS

1. C

OPY

1. Power on the system by pressing the button on the lower right front of the

unit. You will then see the system initializing and performing a self test on

the front panel LED. The LED will show "Detect Drives", and then switch to

copy mode.

2. To begin the duplication operation, load the top drive (reader) with the mas-

ter disc. Load the lower drive (writer) with high quality DVD-R, DVD+R, or CD-

R media.

3. Press the "ENT" button to begin duplicating. The unit will automatically ana-

lyze the master disc, and begin duplicating at the maximum recording

speed.

4. The LCD will display the progress and display OK when the duplication is

complete. Upon successful duplication the copied disc will be ejected, if the

duplication fails the disc will remain in the bottom drive.

The LCD will display:

To continue the same duplication job; reload the writer drive with another blank

recordable media and press the "ENT" button to start duplicating again. To start

a new job, place a new master disc in the reader drive.

2. T

EST

The test function is used to check whether a disc will successfully copy. It sim-

ulates the copying process, no data will be written to the recordable media.

1. Select the function using the up and down arrows.

www.discmakers.com

Copy

OK: 01