Disc Makers ReflexPro4 Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Disc Makers ReflexPro4. Disc Makers ReflexPro4 13 pages. Cd-r disc duplicator reflexpro series
Également pour Disc Makers ReflexPro4 : Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur (15 pages)

Imprimer la page

1. Installation and Setup

CD Reader Drive

The CD-ROM (Reader) drive can be selected manually. The default setting is

AUTO, the Reflex will select the CD-ROM drive automatically (the top drive). If you wish

to change the default Reader drive to another drive other than the top, use this setting.

Press the STATUS button to change the setting and the START button to exit.

CD-DA Load Speed

This setting allows the user to adjust the speed at which music tracks are imported to the

hard drive in the system. This may affect the quality of the individual tracks and ultimate-

ly the final compilation audio disc being created and duplicated by the system. The

default setting is AUTO, whereby the system will automatically read in the audio data at

maximum speed, unless the system detects any errors. Press the STATUS button to

change the setting and the START button to exit.

Eject Disc

This setting controls the ejection of the discs by the CD writers. Three options are

available: ALWAYS means the CD writers will always eject the CD discs whether duplica-

tion is successful or has failed. NO means all discs will remain in the CD writers when

the job is done. You will then need to eject the discs from the CD writers manually. The

PASS setting will only eject the passed discs automatically and leave the failed discs in

the CD writers. Press the STATUS switch to reject those failed CDs. Press the STATUS

button to change the setting and the START button to exit.

Buzzer

This setting controls the ON and OFF function of the system buzzer. The default

setting is ON. Press the STATUS button to change the setting and the START button

to exit.

CD+G

This setting activates the duplication capability of the CD+G format. The default

setting is NO. Press the STATUS button to change the setting and the START button to

exit.

Copy Comp Eject

This setting controls the ejection of the CD writers under the COPY + COMPARE

function. If the setting is YES, the trays will eject the recorded discs after duplicating. The

system will re-insert the same discs again for subsequent comparison. If the setting is

NO, the writers will not be ejected between COPY and COMPARE. The default setting is

AUTO, which means the ejection of the writers will take place after the initial duplication.

Press the STATUS button to change the setting and the START button to exit.

Mode 2 Compare

This setting can be activated to compare a source data format stored in a MODE 2

source disc. The default setting is NO. Press the STATUS button to change the

setting and the START button to exit.

www.discmakers.com

1-888-800-4041