Disc Makers ReflexPro7 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Disc Makers ReflexPro7. Disc Makers ReflexPro7 15 pages. Cd-r disc duplicator reflexpro series
Également pour Disc Makers ReflexPro7 : Manuel d'instruction (13 pages), Manuel de démarrage rapide (2 pages)

Imprimer la page

Upon completion of this test the following will display on the LCD.

Compare

Fail:1

In this example three discs compared successfully and 1 was different. The

successful disc will be ejected.

Pressing the 'ENT' button will identify the source for the comparison and the

size of the source in MB. Pressing 'ENT' again will display the first (topmost

recorder) drive and the condition of the comparison, "Identical" is any

passed disc. Pressing the 'ENT' button will cycle through all the recorder

drives and give the condition.

Press the 'ESC' key to return to the main menu.

The failed conditions are: TOC not match, Cannot read TOC, or Read disc error.

6. P

RESCAN

The prescan function only looks at the master CD. If the ReflexPro is in hard

drive to disc mode the data in the partition is examined. If the disc to disc

mode is current any disc in the source (Src) drive will be examined. This is

used to verify that the master can be read correctly without errors

In the hard drive to disc mode: Select the loaded master to analyze and press

the 'ENT' button. The unit will analyze the master on the hard drive and a mes-

sage will be displayed "Prescan OK!"

In the disc to disc mode: Load the top drive (Src) with the master disc press

the 'ENT' button to start the process, the unit will analyze the master on the

(Src) drive, and then a message will be displayed regarding the results.

7. D

ISC

NFO

The disc info function only looks at the master CD. To use this function it is nec-

essary to change to the disc to disc mode, see Step 8 (Select Source). It will

1-800-237-6666

OK:3

Diff:1

www.discmakers.com

display the session and tracks on the CD, total time of the CD and size of

the CD.

1. Select the function using the up and down arrows.

2. Load the Src drive with the master disc.

3. Press the 'ENT' button to start the process. Pressing the up and down arrow

will scan through the information.

8. S

ELECT

OURCE

This function is used to select the mode the ReflexPro will operate under. When

the hard drive is chosen as the source (Src) the unit will be in hard drive to disc

mode. Choosing any recorder drive as the source (Src) will cause the unit to

copy in disc to disc mode.

1. Select the function using the up and down arrows.

2. Press the up and down arrow to cycle through the available sources.

Typically the sources are "Src: hard drive ØØ IDEØ Master" and "Src: CD-RW

Ø1 IDE1 Slave" The CD-RW drives are numbered from Ø1 to Ø7 with the top

drive being Ø1 and the bottom drive being Ø7.

3. Press the 'ENT' button to select the source in view on the LCD. The display

will say the source and "... selected!"

4. Press the arrow keys to move to another function.

9. I

MAGE

This function is used to manipulate images on the hard drive. There are six sub

functions that can be done.

9.01 Load: use this sub-function to load an image of the CD master onto the

hard drive

1. Press the down arrow until you see "9. Image" then press the 'ENT' button,

you should see "9-01. Image P: A Load"

2. Load the top drive with the master disc and press the 'ENT' button. The mas-

ter disc will copy to the hard drive and the display will read "Image Load OK."

9.02 Delete Image: use this sub-function to delete an image from the hard

drive