DISCO DAD361 Manuel de maintenance des données - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de maintenance des données pour {nom_de_la_catégorie} DISCO DAD361. DISCO DAD361 20 pages. Automatic dicing/cutting saws
Également pour DISCO DAD361 : Manuel d'entretien (20 pages)
Imprimer la page
- 1. Read Carefully before Using this Manual
- 2. Introduction
- 2. Table of Contents
- 3. Contents
- 4. C. General Description of Data Screen
- 5. Important Safety Information
- 5. General Safety Precautions
- 5. Safety Precautions to be Observed During Operation
- 5. Inherently Hazardous Areas and Ways to Avoid Hazards
- 5. EMO Switch
- 5. Operations
Safety label
Safety labels are affixed to the hazardous sections of the machine. Before
using the machine, verify the label positions and thoroughly understand the
precautions and warning indicated by the safety labels.
Label
Rotary Blade
Label
WARNING
Driving Section
Label
CAUTION
Electrical Shock
Hazard Label
General Label
Hazard Level
It is possible that your hands and
fingers may be cut by the rotating
blade.
Observe the following precautions
for at least 15 seconds for
WARNING
321/351/361 or 20 seconds for
341/381 until the spindle comes to
a complete stop:
- Do not place your hands or fingers
- Ensure that the splash cover is
It is possible that yours hands and
fingers may be caught and injured
by the driving section.
While the power is ON, ensure that
the cover is kept closed.
CAUTION
Use care to avoid possible electrical
shock hazard.
WARNING
General caution/warning/danger
label.
WARNING
Meaning of Label
near the blade or flange.
kept closed.