Discount Car Stereo A2D-CDR30 Démarrage rapide Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Démarrage rapide Manuel d'installation pour {nom_de_la_catégorie} Discount Car Stereo A2D-CDR30. Discount Car Stereo A2D-CDR30 7 pages. Musicstreaming for porsche cdr30/31 radios
Également pour Discount Car Stereo A2D-CDR30 : Démarrage rapide Manuel d'installation (5 pages)

Imprimer la page

Ground wire to radio chassis

Tap or connect Accessory RED wire to suitable 12V Accessory supply

source in vehicle (e.g., fuse box etc.) Find suggestions below.

Suggested 12V accessory supply options:

1. In 968: Left foot well Fuse box at Row C, Fuse 1 (7.5A/15A)

2. In 987: Kick Panel Fuse box at Row B, Fuse 9 (7.5A)

3. Alternate: Remove hand-brake cover, locate orange wire. (See Fig. 4)

To avoid battery drainage, ensure circuit to which you are connecting the

module 12V accessory wire is turning OFF with key prior to finalizing.

Voltmeter or test light recommended.

4. Tap WHITE wire (pin 12) on radio main Quadlock (See Fig. 5). This wire is

antenna/amp turn on which means it is controlled by radio ON/OFF button.

Fig. 3

below brake lever

Warning: Do not connect accessory wire to 12V battery (always on)

supply. Use voltmeter or test light to verify voltage and engine noise

prior to finalizing install. In case of engine noise, we recommend adding

a noise filter such as our

NF3A

Secure module and proceed to pairing

Fig. 5

Radio main plug

Fig. 4