Discount Car Stereo PORSCHE CR2 Manuel d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Discount Car Stereo PORSCHE CR2. Discount Car Stereo PORSCHE CR2 3 pages.
Imprimer la page
PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
•
Requirements
PORSCHE CR1 and Cr2 RADIOS
Introduction
Those adamant about keeping their vehicle's stock radio, we offer a simple
upgrade that allows the factory radio to support new technology. The IL-CR12
allows Porsche CR-1 & CR-2 cassette radios in the 911, 944, 964, 968, 993 to
charge and play music files from Apple's latest iPods, iPhones and Tablets
+
+
including iPhone 6s, 6
, 7, 12
etc. Because this adapter connects directly to the
radio "CD" port. The factory CD changer (if present), must be disconnected.
Installation
WARNING: Although not critical, we recommend disconnecting the car battery.
Keep in mind all CR-1/2 radios are coded and will not operate without the code.
Radio code must be available for radio to operate upon reconnection. Skip this
step if code is not available.
Radio removal required to gain access to connectors.
.
1.
Remove trim ring and ensure both tabs are centered at which point
radio is pulled from dash (grasping the cassette opening provides
some leverage) or push from rear.
2. If vehicle has a CD changer, disconnect 13-pin plug (See. Fig. 1) from
radio socket
3. Connect adapter 13-pin plug to "CD" socket on radio (See Fig. 2)
13-pin Plug
Fig. 2
Radio socket
Fig. 1