Discount Car Stereo A2D-3.5M Démarrage rapide Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Démarrage rapide Manuel d'installation pour {nom_de_la_catégorie} Discount Car Stereo A2D-3.5M. Discount Car Stereo A2D-3.5M 3 pages. For radios with aux input jack

Imprimer la page
Pairing
Pairing varies among devices but basic steps are the same. This process is done
upon initial install and will not have to be repeated
Turn Ignition and radio "ON"
1.
LED flashes (see through peephole)
Settings, Wireless & Networks, Bluetooth
On A2DP device: go to
2.
Settings
Bluetooth
Select
and turn on.
3.
Select Bluetooth settings
4.
Scan for devices
Tap
.
5.
Wait for Bluetooth device name to appear and select it.
6.
LED will glow steady
Operation
Set radio to "AUX" Mode
1.
Launch Smartphone or tablet streaming application.
2.
Use stereo volume control button to set the playback level. If distorted,
3.
lower volume on audio device or if inaudible, raise volume on device.
Warning
!
Playlist and Track selection is *NOT* possible from the stereo. Use audio
device (e.g., smartphone) built-in controls to access and control the audio files.
If correct operation is confirmed go ahead and reinstall radio.
4.
Frequent asked questions & troubleshooting
Does the A2D-3.5M work on all radios?
1.
NO;
Works on radios with a 3.5mm aux input jack
2. Can I connect red wire to a permanent +12V source instead of
accessory source?
YES; but you will may forfeit ability to pair/unpair module upon entering
vehicle.
3. Do I have to pair module each time I get into vehicle?
NO;
when properly connected to an accessory supply, the module
automatically pairs with audio device upon turning the key.
Once paired
4. My car radio does not have AUX inputs, how can I get the A2D-3.5M to
work?
If car radio (factory or aftermarket) does not have AUX inputs, purchase an
auxiliary input adapter.
5. Can I use the A2D-3.5M for Bluetooth hands free calls?
NO;
the A2D-3.5M does not support Hands-Fee calls (HFP)
How does it work if paired to more than one device?
6.
More than one device can be paired, however the device last used gets
priority and will pair first. To pair a second device simply un-pair first
7. Can I use this with my home stereo or boombox?
YES,
Email
© 1995-Jan-22 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.
so long it has a 3.5mm audio input and 12V supply/ground
.