Discount Car Stereo A2D-GM3 Démarrage rapide Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Démarrage rapide Manuel d'installation pour {nom_de_la_catégorie} Discount Car Stereo A2D-GM3. Discount Car Stereo A2D-GM3 6 pages. For gm class iivehicles with xm module and/or remote cd changer

Imprimer la page

5. Connect harness 12-pin plug (See. Fig.2) to radio 12-pin connector

vacated in step 3.

6. Connect black wire to ground (we recommend radio chassis)

7. Connect red wire to 12V Accessory supply in vehicle.

Warning: Accessory (ACC) supply available on BROWN wire (Most GM's)

under steering column or climate control harness or in driver side fuse

panel. Use voltmeter to verify voltage and check for engine noise prior to

finalizing. Accessory power is active when ignition is in "ACC" or "ON"

positions

Pairing

Pairing process varies among devices but the basic steps are the same.

This process is done upon initial install and may not have to be repeated.

Module name (ID) varies based on factory option selected during checkout.

Vehicles with remote CD changer, RSE or subscribed to XM receive our

Bluetooth 5 module, however those not subscribed to XM (expired subscription),

receive our Bluetooth 4.2 module.

Turn Ignition and radio "ON"

LED inside module peephole flashes (pairing mode)

Bluetooth Settings

2. Go to device

Bluetooth

3. Select

and turn on.

Scan for devices

4. Tap

5. Wait for Bluetooth name to appear and select it. (See images below)

LED inside module peephole glows steady (paired)

Vehicles with XM module (not subscribed)

Vehicles with remote CD changer, or XM module (subscribed) or RSE