BLADEZ PB-SM1816 Manuel du produit - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} BLADEZ PB-SM1816. BLADEZ PB-SM1816 16 pages. Xtr street ii electric power board
Imprimer la pageTROUBLESHOOTING GUIDE
The following guide will help assist you in identifying and correction common problems with your XTR-
Street II:
Symptoms
The charger light turns green
right away
Batteries do not hold a charge.
Unit does not have specified
travel range.
Unit moves intermittently, or very
slow.
Unit will not move when throttle
lever is activated.
Unit stops abruptly during use.
The unit is turned on but the light
does not come on.
OTHER QUESTIONS
Where can get replacement and aftermarket parts?
From your local Servicing Dealer of over the web at:
www.ebladez.com
For additional questions, service instruction, further information and important phone numbers, please go
to the Bladez website at www.ebladez.com.
If you have any additional questions, please contact Bladez Customer Service Department at
(866) 325-2339 x 1
Thank you for purchasing a Bladez Power Board and please tell your friends about how much fun you
had on the Bladez Power Board.
Potential Causes:
This indicates the batteries are
adequately charged. Most units
come charged in the box.
Batteries have reached the end
of their useful life or poor polarity
between batteries.
Charger is malfunctioning.
Batteries not fully charged or
polarity problem.
Throttle cable is loose.
Throttle cable is loose.
Batteries not fully charged.
Batteries have reached the end
of their useful life.
Circuit breaker has "tripped".
Bad on/off switch.
Dead batteries.
Batteries disconnected
Page 14
Solutions:
No action needed.
Replace batteries.
Replace charger unit.
Charge or replace batteries.
Tighten or Replace cable.
Tighten cable.
Replace batteries, charger or
circuit board.
Replace batteries.
Allow electric motor to cool and
re-set circuit breaker by turning
power switch on and off.
Replace on/off switch
Replace batteries
Check connections