Aereco HAT-100-B Documentation technique et de maintenance - Page 7
Parcourez en ligne ou téléchargez le pdf Documentation technique et de maintenance pour {nom_de_la_catégorie} Aereco HAT-100-B. Aereco HAT-100-B 12 pages.
Imprimer la page
TECHNICAL AND MAINTENANCE DOCUMENTATION HAT
3
4
STER
To open the housing of HD automated unit use a screwdriver. Do not use a power screw-
driver because of the danger of damaging the screws and loss of tightness of the casing.
1 PG11 cable gland enables connection of 1x230 V power supply. The power wires should
be connected to the corresponding terminal blocks 2, in accordance with point 4 of the
technical and propulsion documentation. The potentiometer 3 is used to change the setting
of the base pressure. The base pressure is preset at the factory. Do not change the default
connections 4. The automated system is equipped with a switch 5. The switch button is
located on the lid of the casing.
www.aereco.com
2
PE PE L N
4
ZAS
5
1
N L
7
ATTENTION!!!
After connecting the power
supply, mount the cover of the
automated system and tighten
it with screws with 0.8 Nm
force.