Discount Equipment SR-12 Maintenance - Page 2

Parcourez en ligne ou téléchargez le pdf Maintenance pour {nom_de_la_catégorie} Discount Equipment SR-12. Discount Equipment SR-12 2 pages. Windsor industries upright vacuum

Imprimer la page
33
34
32
Figure 4
35
36
37
Figure 5
42
38
Figure 6
26
Figure 7
The guarantee is invalidated if take out parts not approved by WINDSOR
After 20 paper bags have been used also change the exhaust filter (Figure 4, 32). To remove
the exhaust filter push the catch (Figure 4, 33) backward and remove the filter cover (34)
Insert the new filter and replace the filter cover.
To change the brush roller (Figure 5, 35) push the button (Figure 5, 36), and remove the side
plate (Figure 5, 37). Turn the brush clockwise a quarter of a turn and pull the brush roller out.
Slide the new brush roller into the brush housing and turn it until it locates into position. Push
the button (36) and press the side plate (37) bank into place.
Underneath the machine is an inspection door to check for blockages (Figure 6, 38). To open
the door press down the catch on the door. The stainless steel bottom plate (Figure, 42) can be
removed to clean out the brush roller housing by unscrewing the holding straws.
Blockages in the neck (SR12 Description 2, 20) can be checked by first lifting off the dust bag
housing by pressing the catch (SR12 Description 1, 8). Then release the foot pedal. Lower the
neck and check into the tube next to the pedal.
Blockages in the hose can be cleared by taking the hose off the machine and replacing it the
wrong way around in the connecting tube (SR-12 Description 12, 2), holding it upright with
one hand blocking the top and switching on the machine. (If necessary, quickly lift your hand
on and off the end of the hose
e.g., bags, filters, brush roller, etc., are fitted.