Arnica Puf Manuel d'instruction - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Arnica Puf. Arnica Puf 12 pages.
Imprimer la pageironing), de-scaling process
must be done more frequently.
2. Set the steam control button at 0 position.
3. Fill water in the water tank at maximum level. Never put vinegar or other
de-scaling chemical
matters into the water tank.
4. Plug the iron.
5. Set the temperature button at MAX setting.
6. When the temperature light goes out, unplug the iron.
7. Hold the iron over the washbasin and set the steam control button at
de-scaling position .
Steam control button will move out slightly by springing.
8. Pull the steam control button out.
9. Hold the iron over the washbasin and rock it. Super heated water and
steam will flow down
through the holes in the soleplate together with de-scale and other residues
(if any).
10. Put some vinegar into a glass and let the nozzle of steam control button
sit in it for a time.
11. Don't bend the needle of the steam control button by any means and don't
damage.
12. Re-mount the steam control button by placing the nozzle of the needle in
just the middle of the
hole and putting the small rim at the edge of the needle into the housing. While
setting the steam
control button at position, press towards inside at the same time and set
at 0 position.
13. If there is still residue in the iron, repeat the de-scaling process.
After De-scaling Process;
1. Plug the iron and ensure that the iron gets warmer to make the soleplate
dry.
2. When the temperature light goes out, unplug the iron.
3. In order to clean the water stains that might accumulate over the soleplate,
move the iron slightly
on an old rag.
Storing:
1. Set the steam control button at 0 position, unplug the iron and let it cool
down.
2. Clean the soleplate of your iron with a soft cloth.
3. Store on the surfaces with soft base. Avoid contacting metal objects.
4. In order to clean your iron, don't use cleaning fibers, vinegar or other
chemical matters by any
means.
5. Rinse the water tank by water frequently and empty after cleaning.
6. Wind the electric cable around the cable spinning section.
7. Store the iron on its heel (vertically), on a dry and safe surface.
8