DiscountRamps Apex ATR-RACK-V2 Manuel d'instructions - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} DiscountRamps Apex ATR-RACK-V2. DiscountRamps Apex ATR-RACK-V2 8 pages. 4 post aluminum truck rack

Imprimer la page

ASSEMBLY PROCEDURES

Step 1: Support Arm Assembly
① All M10x40 Button Head
Screws (19), require a drop of
thread
glue
installation/ tightening within
2 minutes of glue application.
④ Secure Upper (5), and Lower
(6), Connecting Plates using
M10x55 Button Head Screws
(20), and M10 Lock Nuts (21),
as shown.
CORRECT
assembly
example for front and
rear driver side support
arms.
The upper connecting
base (5), is level and
parallel to rear leg rail
mount (3).
Rev. 062118
② Connect Upper Connecting
Plate (5), on Support Bar (2),
(12),
and
and secure with M10x40
Button Head Screws (19), as
shown. Note: Use Thread
Glue (23), on screws as noted
in ①.
⑤ The front driver side support
arm
Confirm it is correct using the
diagrams below.
DiscountRamps.com • 1-888-651-3431
is
now
assembled.
INCORRECT
example for front and rear
driver side support arms.
The upper connecting
base (5), is not level and
parallel to rear leg rail
mount (3), because it is
facing
the
direction.
③ Connect Driver Side Front (3),
& Lower Connecting Plate
(6), to bottom of support bar
(2), using M10x40 Button
Head Screws (19), as shown.
Note: Use Thread Glue (12),
on screws as noted in ①.
⑥ Repeat this support arm
assembly procedure using
the Passenger Side Front (4).
Then
complete
support arms in the same
manner.
assembly
wrong
the
rear
Page 4