DISCOVER D904 Manuel - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DISCOVER D904. DISCOVER D904 19 pages.

3.10 Overview of audio signals

Action

Low battery

Nearly out of range

Out of range

Back in range

Receiver volume up/

down

Mute on

Mute off

Ringer (EH device)

You can register a new primary headset unit to your

Discover D904 base using the following procedure:

•

Press and hold the 'TEL' button (7) on the

headset base for five seconds to enter the

registration mode. The 'TEL' LED (7) will flash to

indicate it is now in registration mode.

•

Press and hold the 'mute' button (18) on the

back of the headset for five seconds for the

headset to enter the registration mode. The

headset LED (1) will flash twice and then

light-up during the registration mode period.

•

The headset will now be registered to the

base which will take around 30 seconds. When

the registration has completed, the headset

LED and the base 'TEL' LED (7) will stop flashing.

3.12 Using the Discover D904 for call recording

With the D904 it is possible to connect a normal

telephone call to the USB port of your computer.

This feature can be used to record phone calls with

voice recording software on your PC.

headsetadvisor.com | 1-800-683-5715

Audio indication

2 rapid beeps (60 sec repeat)

2 beeps

2 pitch tone

4 rapid beeps

1 beep

2 pitch tone (8 sec repeat)

1 beep

Multi tone (2 sec repeat)