Abbey RY-XD01 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Abbey RY-XD01. Abbey RY-XD01 6 pages. Formaldehyde removal, deodorization, disinfection
Imprimer la pageOperation instruction
1. Press the switch for 2 seconds, the device starts working (the first default mode is to commonly
remove formaldehyde, disinfect and deodorize), the buzzer then makes a sound "bee" with a blue
indicator light on, and the device automatically stops after working for 30 minutes.
2. Touch the switch again to start the second gear (deeply remove formaldehyde, disinfect and
deodorize), the buzzer then makes a sound "bee" with two blue indicator lights on, and the device
automatically stops after working for 60 minutes.
3. Touch the switch again, the buzzer then makes a sound "bee" and the device goes off.
4. Charging instruction:
A: Low battery: two red indicator lights flicker and the buzzer makes a sound "bee" for 1.5 seconds,
continually for 5 times;
B: While charging, the red indicator light intermittently flickers every 1.5 seconds.
C: While charging and working on the same time, one red indicator light is constantly ON in the first
gear and two red indicator lights are constantly ON in the second gear.
D: When it is fully charged, two green indicator lights are constantly ON.
5. When it is in working mode, the buzzer makes a sound "bee" for 3 times, when the device works for 5
minutes, this is a reminder that the device is under disinfection and formaldehyde removal procedure,
people and animals should leave the room at this time.
Technical parameters
Product name
ABBEY
Product model
RY-XD01
Product net weight
160g
Product size
Diameter: 98mm, thickness: 30mm
Package size
110*130*40mm
Rated voltage
Maximum power
Ozone concentration
Applicable area
PAGE: 03
DC-5V
2.5W
20mg/Hour
5-10m³