Blake UK PROCEPTION PROAPW750L Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Blake UK PROCEPTION PROAPW750L. Blake UK PROCEPTION PROAPW750L 2 pages. In-wall and ceiling high speed access points
Également pour Blake UK PROCEPTION PROAPW750L : Instructions avancées (15 pages), Manuel de l'utilisateur (20 pages)

Imprimer la page

PROAPW300L- 300Mbps 2.4GHz In Wall Access Point

with RJ45 Port

PROAPW750L- 750Mbps 2.4 & 5GHz In Wall Access Point

with RJ45 Port

SIX STEP EASY AND QUICK SETUP.

If the access point is still in its default

If you are using Apple products simply scan the QR codes below with your Tablet.

The 1

QR code connects to the Wi-Fi and the 2

This can sometimes work with Android depending on the QR code app and the Tablet. If not

download QR Code Reader as detailed below.

1. On an Apple phone, using your camera, scan QR code 1

On android download the free QR Code Reader

by Duy Pham (MMLab) from Playstore and scan QR Code 1

Wait 10 seconds for the phone to connect to the AP

2. Now Scan QR code 2

If after several seconds you get "webpage not available, simply switch off mobile

data on your device and scan again

3. Log in with the word admin (lowercase)

4. Select Get IP from Gateway (Customers router)

If your connecting to a business network you may need to select static IP and set

up with setting from the company network Admin.

5. Set-up Wi-Fi name (SSID) and required password

It is recommended that you leave all other setting to default unless you are

familiar with these settings.

6. Click Apply...

You have now successfully setup the Access point with your Wi-fi name and

password. The Ap will now reboot, get a new IP from the customers router and

start broadcasting Wi-Fi. This can take 2-3 mins for this to complete. You may

see 2.4 GHz Wi-Fi start first and 5GHz Wi-Fi start a little later.

You will now need to reconnect to the Wi-Fi with your new SSID and password.

NOTE:- You can also connect to the Wi-Fi name Prowifi_2.4G with password

4wG7cZXd and browse to 192.168.188.253 if the QR code cannot be scanned.

[email protected]

www.blake-uk.com

0114 223 5000

PD2011-8246-04

Gateway

Apple Quick Connect

1st Scan here to connect

Blake UK hereby declares that the radio equipment type PROAPW300L, PROAPW750L & PROAPCEILING

The full text of the EU declaration of conformity is available at the following internet

mode, then connection is easier via Wi-Fi.

QR code connects to the Login screen.

2nd Scan here to setup

EU Declaration of Conformity

are in compliance with Directive 2014/53/EU.

address: