3D Factories EASY 3D MAKER Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 3D Factories EASY 3D MAKER. 3D Factories EASY 3D MAKER 14 pages.

Imprimer la page

1. Minimum Pc Requirements

8.5 TRYSKA A ČIŠTĚNÍ TRYSKY

SAFETY WARNING!

o the nozzle flowing molten material coating layers. Nozzle temperature can reach up to 280 ° C, please

observe caution.

o To print ran correctly, it is necessary to keep the nozzle clean.

o Do not touch the print head when the machine Danger of burns!

o Clean the print nozzles always turned off the machine and when the print nozzle has cooled down for

about 30 minutes after the last press and switched off.

Make sure the nozzle is clean, residue-free material. If necessary, remove waste material.

If the material even after warming up and running extruder still leaking, check that it is properly implemented

filament or carefully clean with the drill bit diameter of 0.5 mm nozzle. Cleaning should be done very carefully

and always perpendicular to the hole. Never hold drill in hand, but only on the horns. This cleaning takes place

when the material is A hot! Danger of burns!

9. TISK

For fixing the printed object to the base use paper labels or using a special adhesive. Here is also described a

procedure of operations.

9.1 TISKOVÉ MATERIÁLY

Supported is PLA as a basic material. The melting point is 190 ° C. The diameter of the filament is 1.75 mm and

it is possible to order the material in several colors (natural, red, black, blue ... see www.3dfactories.com) The

coil weight is 1 kg or 2Kg.

VERSION: 1.9.2012

- 9 -