Blakeslee UC-18 Manuel d'instructions pour l'installation, l'utilisation et l'entretien - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour l'installation, l'utilisation et l'entretien pour {nom_de_la_catégorie} Blakeslee UC-18. Blakeslee UC-18 17 pages.
Imprimer la page
USA
9. TROUBLESHOOTING
Type of problem
The machine does not
turn on
The machine does not
load water.
Wa s h i n g r e s u l t s a r e
unsatisfactory.
completely dried
glasses and dishes.
The machine suddenly
stops during the cycle
During wash cycle the
machine stops and draws
water
Note For any other problems, contact the Technical Assistance service.
The manufacturer reserves the right to alter the technical characteristics without prior notice.
page 32
Possible causes
Main switch not ON.
Water valve shut.
caked with lime deposists
Faulty pressure switch
or the rack does not rotate.
Filters are dirty.
Fats or starches are not removed Detergent concentration too low
for type of grime build-up
Wash water too dirty
The rack is unsuitable for the
glasses and dishes
The dishes have been too long in
the tank
Rinse water temperature is less Check the temperature of the booster thermostat. Call the
rough or porous for material wear.
Too much rinse-aid chemical.
Too hard water.
The machine is connected to an
overloaded circuit
Water from the previous day has
not been replaced
Faulty pressure switch
The overflow tube is incorrectly
positioned
USER SECTION
Turn switch ON.
Open the hot and/or cold water valve.
an external water softener
service)
replace in original position.
Use a non-foaming detergent or reduce the amount of that
used. Check the rinse aid dispenser
operation
Choose a longer cycle if possible, otherwise repeat wash
cycle
Use a suitable rack enabling the dishes to be tilted so water
immediately, allowing the air to dry the glasses and dishes
Replace type of dishes and glasses used
Reduce the rinse aid amount by turning the micrometric
and the pressure switch
Cure
Rinse aid
use)
Rinse aid
use)