Blakeslee UC20 Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Blakeslee UC20. Blakeslee UC20 13 pages. Undercounter dishwasher
Imprimer la page11. When proper temperatures are reached, a green indicator light appears and the dishwasher is
ready for a washing cycle. To start the washing cycle, depress the Start/Enter switch.
12. At the beginning of the wash cycle, a detergent pump will systematically add detergent into the
wash tank.
13. At the end of the wash cycle, a blue indicator light appears. The final rinse is now in process.
The dishwasher will perform a slight draining operation prior to the final rinse cycle. Towards
the end of the rinse cycle, a rinse aid will automatically inject the additive into the final rinse
water line.
14. Operation is complete when the blue indicator light turns off.
15. The dishwasher is ready for the next loading session.
NOTE: It is important to check and clean the strainer when prompted to do so.
A "CLEAN STRAINER" prompt will appear after:
a. Several loads have been washed in the same washing mode.
b. A washing mode has been changed (eg. changing from a dishware mode to a flatware
mode).
OPERATING DISHWAHSER IN THE PROGRAMABLE MODE
The programmable mode allows an operator to manually select and program a custom wash and
rinse cycle. Selections include:
•
Wash and rinse mode
Low, Medium, Heavy
•
Wash and rinse temperature
Wash - 150° F to 170° F in 5° F increments
Rinse - 180° F to 190° F in 5° F increments
The programmable-cycle default mode is Low wash and rinse. To change either one of these settings,
depress and hold the Select Cycle Up and Down Keys simultaneously for fifteen seconds. This will
prompt the dishwasher into a setup screen. To change Wash and rinse mode, depress the Select
Cycle Down Key until the desired cycle appears on the display screen. Depress the Select Cycle Up
Key to save the cycle. Repeat for wash and rinse temperature settings. When all selections have
been made, depress the Start/Enter switch to exit the setup screen
-4-