Aereco CAP1668 Instructions d'installation et d'entretien - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'entretien pour {nom_de_la_catégorie} Aereco CAP1668. Aereco CAP1668 8 pages. Modbus sensor hub 8 se - accessories & third party modbus system

Imprimer la page
B
A
C
D
Modbus address rotary switch for selecting
sensors ( on the sensor's PCB)
2
4
3
TF6581_A_NOT_INST_C02_SENSOR_MODBUS
4. DIMENSIONS
5. THE S-C02/T MODBUS SENSOR'S CONNECTIONS WITH HUB 8
SE
5.1. SETTING OF THE S-C02/T SENSORS FOR HUB 8 SE
8 indexation positions are allowed for every sensor (C0
E
included.
F
Important: Before to start the heat recovery unit, every sensor must have a specific
0
identification number (1 to 8) so that the system can identify them. This index number has to
be different from a sensor to another one. The index numbers must be incremented to each
other so that there is no digit jump.
Example:
· CO
sensor in living room = 4 / because Hub SE outlet n°4 is connected to living room.
2
· Occupancy sensor bedroom A = 1 / because Hub SE outlet n°1 is connected to bedroom A.
· Occupancy sensor bedroom B = 2 / because Hub SE outlet n°2 is connected to bedroom B.
· Occupancy sensor bedroom C = 3 / because Hub SE outlet n°3 is connected to bedroom C.
5
Note: the sensors are delivered in position 0. They must be manipulated with extreme care.
95
95
32
82
or Occupancy ): position 1 to position 8
2
3 / 8
Aereco S.A.