3D Hobby Shop 70 AJ SLICK Manuel d'assemblage - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} 3D Hobby Shop 70 AJ SLICK. 3D Hobby Shop 70 AJ SLICK 19 pages.
Imprimer la page14
NOTE: The firewall of the Slick is pre-drilled for popular motor types. If your motor uses a different bolt
pattern, mark and drill the firewall as shown.
The firewall of the Slick is arranged to allow the widest possible selection of motors to fit. Extra space
has been provided for long motors and long prop adaptors. For this reason, if you motor is compact, you
will need to use spacers between the motor and firewall. A set of wooden spacers is included in your kit,
these can be sanded to length, or other plastic, wood, or metal spacers set can be used. NOTE: The
correct distance between the firewall and the back of the spinner plate is 80mm.
NOTE: Now is a good time to go over all joints on motor box, landing gear mount, and battery tray with
thin CA glue for extra strength in these high-stress areas.
Attach the motor using the provided 4mm screws and blind nuts. Use loctite on the mounting bolts.
Mount the speed control to the side of the motor box as shown using Velcro and/or Zip ties.