Cube STEREO 160 HYBRID HPC Instructions supplémentaires - Page 12
Parcourez en ligne ou téléchargez le pdf Instructions supplémentaires pour {nom_de_la_catégorie} Cube STEREO 160 HYBRID HPC. Cube STEREO 160 HYBRID HPC 13 pages. Additional instructions for cube carbon frame and (full-) carbon forks
Imprimer la page
7.2 The racing bike frame
Seat post assembly
Consider max. allowed seat post length (x) including min. insert length (y):
100 mm (y) at 350 mm (x)
For seat post assembly apply carbon assembly paste to seat post and to the
inside of seat tube. It is not allowed to use standard grease!
Consider torque on seat clamp and seat post!
Max. 6 Nm (apply gradually)
Brake mount screws
5 - 7 Nm
Brake mount
screws
Brake mount screws
6 - 8 Nm
Hanger mount screw(s)
X12 through axle system
Quick release system
Rear derailleur mount screw
8 - 10 Nm
Head set assembly (integrated /
semiintegrated) Special tools for
assembly and disassembly of head
set or head set cups are necessary.
Usage owase is not allowed!
Bottle cage assembly screws
Only M5 screws are allowed.
Max. 3 Nm
Brake mount
screw
8 - 10 Nm
5 - 7 Nm
slightly screwed (1 screw)
slightly screwed (2 screws)
C:68 X/ C:62 / GTC / HPC
Cable routing screws
Max. 1,5 Nm
Brake mount screw
8 - 10 Nm
Braze-on adapter screws
Max. 2 Nm
Front derailleur mount screw
Band type
5 - 7 Nm (apply gradually)
Brazed-on type
Bottom bracket
Use only suitable „Pressfit" bearings. Special tools
for assembly and disassembly of "Pressfit" bearings
are necessary. Grease is only allowed on frames with
alloy tube.
Cable routing or cover screw(s)
Max. 1,5 Nm
INFO
•
LITENING stem clamping 4,5-5Nm
•
LITENING saddle clamping 5-6Nm
•
AERIUM stem clamping 4,5-5Nm
•
AERIUM saddle clamping 5-6Nm
Brake mount screws
5 - 7 Nm
Brake mount screws
6 - 8 Nm
5 - 7 Nm (apply gradually)
| 11