AcouLab Premiere S Manuel du propriétaire - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AcouLab Premiere S. AcouLab Premiere S 19 pages. Active loudspeaker with motional feedback & dsp

Imprimer la page

Switches

(2.1) Mains Switch

The mains switch is located on the mains receptacle. It allows isolating

Première from the mains without physically removing the mains cable.

(2.2) Power Mode Switch

The "Power Mode" switch allows users to choose between three different

modes of operation.

• Trigger (Standby)

In trigger mode, Première will default to a standby state until a

voltage is applied to the trigger input.

Trigger mode is recommenced when using a third party source-

device with a trigger output.

• Auto (Signal detect)

In auto mode, Première will default to a standby state until a

music signal is detected. Auto mode can be used with analog or

digital inputs.

Auto mode is recommended if a third party source is used which

is not equipped with a trigger output.

When an analog source is used, a certain signal level is required to

trigger the detection.

When a digital source is used, a signal is detected if non-zero

samples are passed to the speaker.

• ON (continuous ON)

In ON mode, Première will default to an ON state regardless of the

circumstances.

This mode is not recommended unless the speciﬁc user

application demands it.

Note:

If AcouLink IN is used, the "Power Mode" setting is obsolete. The

AcouLab source device will automatically take control of

Premières power state.