Cubis stakkabox Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cubis stakkabox. Cubis stakkabox 12 pages.

EQUIPMENT AND ADDITIONAL MATERIALS

In addition to the STAKKAbox™ supplied, in order to complete an installation you will need the following:

EQUIPMENT

1. The means of excavating a hole; mechanical digger, pneumatic hammer etc. depending on the ground conditions and size

of chamber being installed.

2. Shovel or spade.

3. Means of compacting base and surrounding material.

Please refer to the "Specification for the Reinstatement of Openings in Highways - Appendix A8"

4. Builders trowel.

5. Straight edge/level.

6. Handsaw.

Furthermore if duct entries are to be cut on site:

7. Hole saw (Sized to the outside diameter of the duct to be installed).

8. A power drill (Compressed air, battery or 110v).

9. Bracing if type and size of chamber requires (See Table 1).

Materials

1. Base materials (See Table 1).

2. Backfill material (See Table 1).

3. Bedding mortar/resin epoxy mortar.

FRAME AND COVER

A frame and cover must be installed, specified to the correct loading as dictated by European standards or any other relevant authority.

CUBIS Industries manufacture a range of covers and frames engineered to work in conjunction with its chambers. Covers and frames that are

not supplied by CUBIS should be agreed to be fit for purpose prior to installation as this might adversely affect the quality of the installation.

HEALTH AND SAFETY

In areas where the public have access, the site should be properly signed and guarded in accordance with the Safety at

Street Works and Road Works code of practice (NRSWA 1991) or equivalent national standard.

Additionally, all other safety precautions required by legislation, the customer and as specified by the contract, the Local

Authorities, other landowners and the Police should be observed at all times.

Before any excavation takes place, all necessary precautions to locate/protect buried services in the location of the

chamber should be taken.

This document is a general installation guide for the following product ranges: STAKKAbox™ ULTIMA, STAKKAbox™ MODULA, STAKKAbox™

Fortress Footway, STAKKAbox™ Fortress Carriageway.