3D Nord magicolor 2300W Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3D Nord magicolor 2300W. 3D Nord magicolor 2300W 19 pages.

Loading Tray 1 (Multipurpose Tray)

Tray 1 (the multipurpose tray) is used for all supported media types,

including envelopes, labels, Japanese-sized postcards, thick stock, and

transparencies.

Check http://printer.konicaminolta.net/support (click on Answer Base) for

currently approved media. To order approved media, go to

www.q-shop.com. For information about loading different types of media,

refer to "Using Media" in the User's Guide.

Attention

Do not mix media types/sizes in the media trays.

Adjust the media guides to fit the size of media that you are loading.

Fan a stack of approximately 200 sheets of paper.

Load the media face up, short edge first.

Often, an arrow on the paper package label indicates the face-up

(printing) side of the paper.

! "

A fill limit mark is provided on the inside of the media guides.

Tray 1 holds 200 sheets of 80 g/m² or 22 lb bond paper.

Adjust the media guides to fit the media.

Attention

Always adjust the media guides after inserting the media. Guides

that are not properly adjusted can cause poor print quality, media

jams, or printer damage.

Setting up Your Printer

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500