Dish Network DuoDVR ViP 622 Configuration de la télécommande - Page 7
Parcourez en ligne ou téléchargez le pdf Configuration de la télécommande pour {nom_de_la_catégorie} Dish Network DuoDVR ViP 622. Dish Network DuoDVR ViP 622 17 pages. Receiver and remote controls
Également pour Dish Network DuoDVR ViP 622 : Manuel de l'utilisateur (17 pages)
Imprimer la page
222.book Page 63 Tuesday, July 25, 2006 1:30 PM
Setting Up Using Device Code Tables
Set up the remote to control other devices using the device codes listed on page 116. In
the instructions below, the column on the left contains the instructions and the column on
the right provides additional information.
1
Turn the device on.
2
Find the brand name of the device in
the tables starting on page 116.
3
Press and hold the mode button until
all the other mode buttons light up, and
then let go of the button. The mode
button flashes.
4
For AUX mode only. Press 0 for a
second TV, or 1 for a second VCR,
or 2 for a tuner, or amplifier.
5
Enter one of the three-digit device
codes from the table using the number
buttons.
6
If you want to program Limited Mode,
press 1. If not, skip to step 7.
7
Press POUND (#).
8
Press POWER to turn off the device. If
the device does not turn off, go to
step 10.
9
Turn the device back on and try some
other buttons to make sure they work.
If the code works for other buttons,
stop here.
Instructions
Remote Controls
Controlling Other Components
Additional Information
Use the device's front panel buttons or its
remote control.
If the brand isn't listed, see Setting Up Using
Device Codes Scan on page 64.
For example, hold TV for a TV until all of the
other mode buttons light. When you let go, TV
will flash.
This step is for programming which kind of
device that should be programmed in AUX
mode. If you're not programming in AUX mode,
skip to step 5.
The three-digit device code should be for the
brand name of your device that you found in
step 2.
See Limited Mode for more information.
If you entered the code correctly, the mode
button flashes three times.
If the code works, the device should turn off.
Sometimes POWER works when other buttons
don't. If in Limited Mode, try VOLUME or
MUTE.
63