CubuSynth Dual CS-20 VCF Manuel de construction - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de construction pour {nom_de_la_catégorie} CubuSynth Dual CS-20 VCF. CubuSynth Dual CS-20 VCF 16 pages. Dual / stereo multimode vcf with self-oscillating resonance and intuitive routing and cv modulation matrix
Également pour CubuSynth Dual CS-20 VCF : Manuel (9 pages)
Imprimer la pageCubuSynth Dual CS-20 VCF - Build Guide
STEP 13 (Main PCB)
Trimmer
2
3296W Trimmer 1k (102)
1
3296W Trimmer 100k (104)
Place the 100k Trimmer according to the marking on the
PCB, like shown in the picture.
You can bend the legs outwards, so it stays in place.
Turn around the board and solder.
STEP 14 (Main PCB)
M3 Standoffs /Screws & Pin Headers
3
HDR-F-2.54_1x8
3
HDR-M-2.54_1x8
1
M3 Spacer 11mm
2
M3 Screw Philips Head
Place the screw in the hole of the PCB and place the spacer, so it stands off on the side with all
components like in the pictue on the left.
Then put together the male and female pin headers and place them on the PCB like shown in the
picture below on the right.
Page 10
RP1_102, RP2_102
RP3_104
J5,J3,J2
J6,J4,J1
PCB V1.4 Mar 2023