ARPEGE SECURITY TC-5500 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ARPEGE SECURITY TC-5500. ARPEGE SECURITY TC-5500 10 pages. Vacuum banknote counter

Imprimer la page

※ The Preset Function Key

This function is designed to set the number of banknote which needs



to be counted. The counting will stop when the counted number of

banknotes reaches your setting. The number below is the total

number of counted notes.

※ The Manual Function Key

This function is designed for manual operation. Users have to press



MANUAL button to make it work after you place the banknotes.

※ The ACC & Clear Function Key

This function allows the users to add different stacks of banknotes



together. Clear Key is for deleting the last accumulating result and it

should be effective in ACC mode.

※ The ＊ Function Key

This function key is designed for UV-Detection. Select this function



then this machine can detect counterfeit note. There are 8 different

UV sensitivity level can be selected.

 How to Operate

※ The Check Function

Step 1： Power on the machine will enter Check Mode automatically. The



buzzer will alarm and the banknote gripper will be released. The LED

display will show the number "0".

Step 2： Put the banknotes on the banknote holder and make the



banknote contact the starting sensor.

Step 3： The machine will start counting automatically and the counting



result will be displayed on the screen.

Step 4： The banknote gripper will be released automatically if the



counting number is correct (100).

Step 5： The buzzer will alarm when the quantity of banknotes is less or



greater than 100, user needs to press the button RESET to release

banknotes.