displayit Graffiti:Plus Wall - Kit A Instructions de montage - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} displayit Graffiti:Plus Wall - Kit A. displayit Graffiti:Plus Wall - Kit A 5 pages. 10’ x 10’ inline display kit

Imprimer la page

Caution! Installing silicone-edged graphics is techniqe sensitive;

Practice will shorten installation time.

How to Install SEG Graphics:

Turn and tuck the side of the graphic with the silicone welt into the SEG groove.

The stitched ege goes into the groove ﬁrst.

Press While

Sliding Hand

Pulling on the silicone welt during installation stretches the silicone and

creates a bulge in the silicone welt that is difﬁcult to correct smoothly.

A. Tuck the graphic into left/upper endcap SEG

channel and partially down the vertical channel bar.

B. Holding the graphic off of the ground, tuck the

center of the graphic on the front of the frame.

C. Tuck the graphic into the right endcap.

displayit.com

Graphic Installation Instructions

Stitched edge

goes in ﬁrst

SEG

groove

Start in

the corner

INCORRECT

Pull

Silicone

Bulge

Installing Fabric Graphics with Endcaps

D. Complete installation of the top

edge of the graphic.

E. Tuck the bottom/front corners

and the middle of the bottom/front.

800.207.0311

Tuck

A series of tucks reduces excess silicone.

After-Hours Emergency: Call or Text 678.723.5343

10' x 10' Inline Display Kit A

Assembly Instructions

Handle graphics with care with clean hands in a

clean environment. Clean cloth or latex gloves

are recommended.

CORRECT

Tuck

F. Complete installation on the

bottom/front.

G. Complete installation of both

endcaps.

Gra ti:Plus V.2 Updated 10/10/2019