Displays2go WL3SDSG Instructions de montage - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Displays2go WL3SDSG. Displays2go WL3SDSG 5 pages. Triangle booth display with custom graphics

Imprimer la page

1. Pull extendable frame apart, then reach inside and expand upward. The frame will extend

naturally as you pull it open.

2. Place frame on its edge, standing straight up.

3. Place support poles and base pieces in groups of three at each point along the front of the unit.

The base pieces will be part of the two edges of the frame, one per group with two support poles.

Support poles will be in groups of three, as shown along the front of the frame.

4. Attach each piece to the frame by sliding sliding the notch over the frame's corner points (see

below).