Displays2go FRCHVWBK Manuel d'instructions de montage - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Displays2go FRCHVWBK. Displays2go FRCHVWBK 6 pages. Half vision wall case

Imprimer la page

ASSEMBLY INSTRUCTIONS

3. GLASS MODULAR ASSEMBLY:

Parts needed:

Back Glass

(X1)

Side Glass

(X2)

Top Glass

(X1)

Glass Shelf

(X3)

Plas�c Glazing (X3)

Carefully li� and insert the Back Glass into the groove in Panel

A at back. Insert (1) Side Glass into the side groove.

Note: Iden�fy the front and the top of glass panels ﬁrst.

Use corner connector and torx screw 3/4"L to connect back

glass and side glass at top. Use edge connector and torx screw

3/4"L to connect 2 glass panels in the middle.

Use edge connector to connect both side glasses with Panel A

with torx screw 3/4"L and pan head screw #6X1/2".

Ver. 04/18

Glass Corner Connector (X2)

Glass Edge Connector

(X8)

Torx Screw X3/4"L (X28)

#6X1/2" Pan head Wood screw (X4)

Glass Shelf supprts Peg (X12)

Place the 2nd side panel into the groove on other side, then

connect it with back glass and Panel A the same way as above.

Iden�fy the front of the top glass, carefully li� it up and place

it on top of the assembled display case. Fix it in place by

fastening torx screw 3/4"L front the top.

Install the shelf support pegs by using torx screw 3/4" through

side glass on both side. Apply plas�c glazings on screws inside

the case. Carefully place (3) glass shelves onto the installed pegs.

5 of 6