ABBOTT & ASHBY AA362W6 Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ABBOTT & ASHBY AA362W6. ABBOTT & ASHBY AA362W6 20 pages. Linisher

Imprimer la page

10. Installation

STEPS ONLY REQUIRED FOR INSTALLING ABBOTT & ASHBY AA362 LINISHING

ATTACHMENT TO AN EXISTING BENCH GRINDER

Abbott & Ashby Linisher Installation Manual

Remove the grinding wheel and guard off the side of the bench grinder

that you would like to install the linishing attachment to. Keep the

original nut and washer holding the grinding wheel in place

Install the Main Bracket (A) to the

Grinder, using the 3 x 6x20mm locking

fasteners (I)

Place the Drive Pulley (H) onto the

shaft of the bench grinder if it is a

16mm dia shaft. If the bench grinder

has a smaller 12mm shaft you will

need to insert the bush (not pictured)

to the shaft and then place the drive

pully onto the shaft to ensure there is a

snug fit.

Place the washer (K) over the shaft

onto the drive pulley