ABBOTT & ASHBY AA362W8 Manuel d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ABBOTT & ASHBY AA362W8. ABBOTT & ASHBY AA362W8 20 pages. Linisher

Imprimer la page
TRACKING:
Turn the unit on and inspect the movement of the belt. If adjustments are required move the
lever into the loose position (A) To correct any tracking concerns simply turn the knob (B) to
adjust the tracking and once adjusted lock the lever gently back into place (C).
A
F
E
A
G
B
Attach the tool rest (A) to the bracket (B) using the long fastener (G) and the Large Washer
(C) and wing nut (D). then attach this to the bench grinder using the 2 x small washers (E)
and 2 x short fasteners (F), allowing no more than 2mm gap between the grinding wheel
and tool rest (A).
Abbott & Ashby Linisher Installation Manual
EYESHIELD:
C
A) Bracket
B) 2 x Washers
B
C) Short Fastener
D) Wing Nut
E) Spring Washer
D
F) Long Fastener
G) Eye Shield
Use the wing nut (D) and 1 x washer (B) secure the eyeshield
G
to the bench grinder allowing no more than 2mm gap
between the grinding wheel and bracket (A)
C
TOOL REST:
D
A) Tool Rest
B) Bracket
C) 1 x Large Washer
D) Wing Nut
E
E) 2 x Small Washers
F) 2 x 8mm Fasteners
F
G) Long Fastener
14