3D Tender XPRO RIB Aluminium 420 Manuel du propriétaire - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} 3D Tender XPRO RIB Aluminium 420. 3D Tender XPRO RIB Aluminium 420 18 pages.
Imprimer la page
Beaching
We recommended the boat not to be powered onto the beach, dragged accross rocks, sand,
gravel or pavement as damage to the fabric and / or hull may result.
OUTBOARD MOTOR :
Install the outboard motor on the transom so that it is positionned as close to the center as
possible. Tighten the transom clamp screws evenly and securely. Occasionally check the clamp
screws for tighness during operation of the outboard motor because they could become loose
due to engine vibration. It is wise to tie the engine to the transom as well as clamping eyes are
provided. Always use the kill switch lanyard properly.
The portable tank should be removed from the boat when fuelling. The tank should be filled in
a ventilated area.
Do not smoke aboard.
Warning
Overpowering a boat can result in serious injury, death or boat damage. Do not use out-
board that exceeds the maximum horsepower given on the motor plate.
MAINTENANCE
General care :
Your inflatable has been especially designed to avoid maintenance problems os far as possible.
However, periodic cleaning will help to keep your boat's good condition especially before winter
www.3dtender.com
15