Aerialix ARLX-OM2400 Manuel de construction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de construction pour {nom_de_la_catégorie} Aerialix ARLX-OM2400. Aerialix ARLX-OM2400 12 pages. Collinear antenna kit

Imprimer la page

802.11 2.4Ghz Low-Power 5dBi Vertical Collinear Antenna

epoxy to fill any voids as shown in Figure 16. Again, if any epoxy should not go where intended, wipe away with dry cloth or

paper towel.

Figure 16. Filling voids after antenna assembly is inserted into radome.

Once all voids are filled, hold radome with SMA connector end up, using your finger to center the connector until epoxy

hardens as shown in Figure 17. Once the epoxy sets, you can proceed to the next task.

Figure 17. Centering antenna in radome while epoxy sets.

Dispense another 10ml(.338 oz), or 1/4 of the container, of the 50/50 epoxy into the mixing container and prepare in accordance

with manufacturers directions.

Turn the radome over (opposite of the decoupler), and apply epoxy liberally into the top of the radome as shown in Figure 18.

Take care to not let epoxy dribble down the side of the radome. If this occurs, quickly wipe away with a dry cloth or paper

towel.