Aerialix ARLX-OM2400-8 Manuel de construction - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de construction pour {nom_de_la_catégorie} Aerialix ARLX-OM2400-8. Aerialix ARLX-OM2400-8 12 pages. Collinear antenna kit

802.11 2.4Ghz Low-Power 5dBi Vertical Collinear Antenna
Thank you for purchasing the Aerialix omnidirectional antenna kit. The enclosed kit requires basic mechanical and electrical
skills. Aerialix disclaims responsibility for any damage or injury caused in the construction of this antenna. This kit is easy to
assemble as long as you follow the directions, take your time, and measure twice. Construction time is one hour, if done
carefully. However it could take much longer if done in haste. You should check our website for the latest version of this
manual at:
http://www.aerialix.com/support.html
The radome (enclosure) of this antenna is constructed of fiberglass. Small particles of this material
are known to be a skin irritant and are probably harmful in other ways as well. While we have made
an effort to keep exposure to any of this fiberglass dust to a minimum and the radome has been
treated with a black acrylic urethane paint further reducing fiberglass dust, rubber gloves should be
worn, and caution used, when touching any unfinished portion of the radome. Children should be
supervised by adults when constructing this kit.
There are two main sections to this antenna. Starting from the bottom of the antenna, the first is the RF connector/decoupler
section with feedline and the second is the elemental array section comprised of a meander-line phase reversal coil, and the
element tubing. The antenna is basically an array of dipoles that are phased aligned by meander line phase-reversal coils that
mate each 1/2 wavelength element to one another.
Figure 1. Conceptual physical diagram. Your kit may contain more or less elements than depicted in the diagram.
Equipment and Materials Needed
Inventory:
When unpacking your kit, do so on a clean and uncluttered workbench.
(C) Aerialix 2002 (2 of 13)
CONSTRUCTION WARNING: