CAMDEN Lazerpoint CM-TX-99 Instructions d'installation

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} CAMDEN Lazerpoint CM-TX-99. CAMDEN Lazerpoint CM-TX-99 2 pages. Rf transmitter

Imprimer la page
Package Contents
CM-TX-99 Lazerpoint™
1
RF Transmitter
Application
Camden CM-TX-99 RF Transmitter is ideal for applications
where running additional cable is expensive or impractical.
Installation
CM-TX-99 is installed by aligning the pins with the socket on
the CM-120i/W Keypad or CM-331/332 Touchless switches
and plugging it in.
Pairing
CM-TX-99 is easily paired with Camden CM-RX-91 and
CM-RX-92 Lazerpoint™ Receivers.
Pairing the CM-120i/W Keypad
To learn the transmitter into the receiver, press the PB1 button
(on the CM-RX-91/92) using a small blunt object, such as a
small blade screwdriver or similar. Within 10 seconds, enter
a valid user code on the CM-120i/W Keypad connected to a
CM-TX-99 transmitter. The Green LED Array will flash once to
confirm enrollment.
Pairing the CM-331/332 Touchless
Switches
To learn the transmitter into the receiver, press the PB1 button
(on the CM-RX-91/92) using a small blunt object, such as a
small blade screwdriver or similar. Within 10 seconds, wave
your hand in front of the CM-331/332 connected to a
CM-TX-99 transmitter to activate the switch. The Green LED
Array will flash once to confirm enrolment.
If you wait longer than the 10-second period, the receiver will
time out of Learn Mode and revert back to standby. The LED
will then flash to indicate the number of transmitters learned
into the receiver.
CM-TX-99 Lazerpoint™ RF Transmitter
Description
CAMDEN DOOR CONTROLS CM-TX-99 RF Transmitter is designed for industrial and
commercial applications, where wireless operation is required. The transmitter is a
plug-in board designed to interface to the CM-120i/W Keypads and the CM-331/332
Touchless Switches.
Installation Instructions
1 ⁄ "
(40mm)
CAMDEN
LAZERPOINT
9/16"
(15mm)
1/4"
(6mm)
5/16"
(8mm)
Page 1 of 2