3D Upfitters Carbon Air Filter Manuel d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3D Upfitters Carbon Air Filter. 3D Upfitters Carbon Air Filter 12 pages. Air filter & vents

Imprimer la page
When inserting the hex nuts be sure to center the nuts in the middle of the holes so that they
will align with the screws. You can use a needle nose pliers or even a pen tip to adjust the
location.
Aligned
Correctly
Off Center
The adapter is then connected to the fan/filter combination using 40mm M4 screws.
Insert all 4 screws only a small way in before attempting to tighten.
Copyright 2022 3D Upfitters LLC
Aligned
Correctly
Off Center
6