3D Upfitters Temp Sensor Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3D Upfitters Temp Sensor. 3D Upfitters Temp Sensor 11 pages.

Imprimer la page

Raw Data

The raw temperature data points in Fahrenheit are logged every hour to text ﬁles on the

SDCARD named "sensor1.txt" and "sensor2.txt". To read or parse the ﬁles move the SDCARD

to your computer and view them using your favorite text editor. Temp values are logged every

hour, with T+0 (the latest values) at the bottom of the ﬁle.

The VOC values are a bit diﬀerent. The values in the graph are capped at 200 ppb, but the

actual RAW sensor values are captured on the SDCARD. Again, refer to the documentation for

the SGP30 for more information.

Wiﬁ/Octoprint

The values for temperature and air quality can optionally be displayed in real-time in Octoprint.

If you want to run Octoprint, that's beyond the scope of this manual, but there are plenty of

online resources on how to hook your 3D printer to Octoprint. These instructions will focus on

connecting this device to an existing Octoprint installation.

The ﬁrst step is conﬁguring the device for Wiﬁ by following the instructions on the touchscreen.

You'll need to use your mobile phone, but it's pretty straightforward.

Once Wiﬁ is conﬁgured, the next step is to conﬁgure Octoprint. The 3DUPﬁtters plugin

depends on another plugin called Plotly. Please search for this plugin and add it to the Plugin

Manager.