CAME 319U36EN Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CAME 319U36EN. CAME 319U36EN 19 pages. Control panel for 24v gearmotors
Imprimer la page5.2 Tools and equipment
Make sure you have all the tools and materials needed to carry out the installation in total safety and in accordance with current
regulations. Here are some examples.
5.3 Fastening and mounting the container
1) Secure the base of the panel in a safe area; yes max. 6 mm
Head with to.
5) Snap the cover onto the hinges. Close it and secure it using the issued
screws.
2) Perforate where shown and insert the gable gland with the corrugated tubes for the
electrical cables to go through.
Careful not to damage the electronic board inside the panel!
Assemble the pressure hinges.
15 mm~
the slide to rotate
After adjusting and setting, secure the cover using the issued screws.
4) insert the hinges into the housing (either left or
right) and secure them using the issued screws
and washers.