CAME 8K01MB-0576 STYLO KIT Manuel d'installation rapide - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} CAME 8K01MB-0576 STYLO KIT. CAME 8K01MB-0576 STYLO KIT 12 pages.
Imprimer la page
stylo-BD:
Preliminary checks
1. Check that the gate structure is sturdy enough, the hinges work efficiently and that there is
no friction between the fixed and moving parts
2. Make sure that measurement
3. Make sure that you have fitted opening and closing mechanical gate stops
Side hung gate GEOMETRY:
Side hung gate GEOMETRY
A
D
Opening
A (mm)
90°
90
90°
230
135°
230
Remove the lower cap
from the gearmotor
GEOMETRY
C
does not exceed the value shown in the reference table
STYLO-ME / STYLO-BD
C (mm)
D (mm)
0÷200
180
0
Securing the transmission arm
1. Assemble the slide guide to the transmission arm as shown in the drawing
2. Insert the guide into the rail (2).
3. Assemble the straight arm onto the gearmotor shaft (3). Cover the hole
Ø 3,5 x 9,5
4. Insert the end caps of the rail and the hole covers (5)
Secure the gearmotor to
the flange using the four
UNI 6954 Ø 3,9 x 9,5
bolts supplied
Secure the upper cap
•
•
400
300
300
(1).
with the cap and secure it using the supplied screws (4).
O-Ring 2012
The greater the motor angle, the greater
the opening speed and the slower the
gear motor's thrust.
The smaller the motor angle, the slower
the opening speed and the greater the
gear motor's thrust.
OUTward OPENING gates
For outward opening gate geometry
please refer to the full Installation Manual.
Tick