CAME A 3024 N Manuel d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CAME A 3024 N. CAME A 3024 N 13 pages. Ati series
Également pour CAME A 3024 N : Manuel d'installation (13 pages)
Imprimer la page
Mounting
The following are just example applications, given that the space for securing the operator and accessories may vary depen-
ding on the dimensions. It is thus up to the installer to choose the most suitable solution.
Pillar
Anchoring plate
Apply the anchoring plate to the pillar using the back bracket (fig. 1) making sure the A and B measurements are right (Tab. 3) betwe-
en the hinge axis and central bore hole on the bracket. The back bracket has several other holes for changing the opening angle of
the gate.
N.B.: increasing the B measurement decreases the opening angle resulting in slower peripheral speed and greater motor thrust on
the gate leaf. Increasing measurement A increases the opening angle resulting in greater peripheral speed and reduced motor thrust
on the gate leaf.
With the gate closed apply the anchoring plate to the gate leaf, making sure that the front bracket is lined up horizontally with the
back bracket and ensuring that measurement E is met.
Gate leaf closed
Hinge
position
Back bracket
Level the bracket
Tab. 3
Gate leaves < 3 m
A
Opening
mm
90°
130
120°
130
Gate leaves < 5 m
90°
200
120°
200
Bushing
Anchoring plate
Front bracket
B
C <
E
mm
mm
mm
130
60
720
110
50
720
200
120
920
140
70
920
Back swivel-joint