abc 9kW LILLY Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} abc 9kW LILLY. abc 9kW LILLY 19 pages.

Midnight time settings:

Set the ON time of the previous day at the desired time (for example,

20.30)

Set the OFF time of the previous day at 23.59 Set the ON time for the

next day at 00.00 Set the OFF time for the next day (for example,

6.30)

The system will be ON on Thursday at 20.30 and OFF on Wednesday

at 6.30.

8.4 Calibration

The calibration option allows ﬁne tuning of the pellet power. If the

pellet power 5 is too high and pellet power 4 insufﬁcient, set the

"Auger" to minus 1 or 2 if the stove is operating at maximum power or

to plus 1 or 2 to if the set pellet power is 4. This procedure results in

the pellet power between 4 and 5. If you increase the "Auger"

calibration, set the "Fun" calibration to the same degree.

8.5 Remote controler

Button 1 activates shutting down.

Button 2 activates ignition.

Button 3 or 4 increases or decreases the pellet power.

When the stove is automatic mode, the remote

controller is not operational.

8.6 Pellet manual loading

This option is to be activated when the stove is put into operation for

the ﬁrst time or when there are pellets in the hopper and auger needs

to be loaded. The loading automatically stops after 600 seconds or at

any time during operation by pressing the button P1.

To activate this function it is necessary that the furnace is off.