CAME BK-2200T Manuel d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CAME BK-2200T. CAME BK-2200T 17 pages.

Maintenance

Periodic maintenance

Periodic maintenance to be carried out by the end-user is as follows: wipe clean the glass surface of the photocells; check that the

safety devices work properly; remove any obstructions.

We suggest checking the state of lubrication and tightness of the anchoring screws on the operator.

-To check the efficiency of the safety devices, move an object in front of the photocells when gate is closing. If the operator inverts the

motion or stops, the photocells are working properly. This is the only maintenance procedure to be carried out with the power source

connected.

-Before performing any maintenance procedures, cut off the main power, to prevent possible accidents due to gate movement.

-To clean the photocells use a water dampened cloth. Do not use solvents or other chemical products which may ruin the devices.

-In the event of any strange vibrations or squeaking, lubricate the joints with grease, as shown in the diagram.

-Make sure there are no plants within the photocell's beam, and that the gate motion is free of any obstacles.

Trouble shooting

MALFUNCTIONS

POSSIBLE CAUSES

The gate will not

• There is no power

open nor close

• The gearmotor is released

• The transmitter's batteries are run down

• The transmitter is broken

• The stop button is either stuck or broken

• The opening/closing button or the key selector are stuck

• Fhotocells in partial stop mode

The gate opens but

• The photocells are engaged

will not close

The flasher does

• The bulb is burnt

not work

C A

M E

CHECK AND REMEDIES

• Check that the power is up

• Lock the gearmotor

• Replace batteries

• Call assistance

• Check that photocells are clean and in

good working order

• Call assistance