CAME v6000 Manuel d'installation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CAME v6000. CAME v6000 17 pages. For garage doors
Imprimer la page
Power supply
The operator is supplied with an electric cable (L = 1.2 m) with Shuko socket already connected.
Warning devices
Flashing light (contact capacity: 24 V - 25 W max).
It fl ashes during opening and closing.
Control devices
OPEN-STOP-CLOSE-STOP function from the control device (N.O. contact)
Safety devices
TX
RX
Reopening contact (N.C.) while closing.
Input for safety devices such as photocells, sensitive edges and other devices compliant with the EN 12978 standard.
While the operator is closing, the opening of the contact causes the reversal of the direction of movement until completely open.
PROGRAMMING
Preparing for programming
Manually attach the door to the guide manually.
Power the operator. After a sound, the board is ready for programming.
Remove the transparent cover to gain access to the keys for programming.
Storage is always the last phase of programming (function 5), otherwise the settings are not saved.
In the event of setting errors, disconnect and reconnect the power supply and reprogram.
Description of the keys
Memorisation key
transmitters
Key to access to the menu and
save changes
If a device is connected, remove the jumper
Display for programming and monitoring of operator functioning
Stop button (NC contact) Stops the door with the exclusion of automatic closing. To
resume movement, press the control button or other control device.
Adjustment and menu
advance button
Adjustment and menu advance button
If a device is connected,
remove the jumper
If a device is connected, remove
the jumper
Key to symbols
L = normal operation
F = obstacle detection
H = encoder error
A = photocell activated