3DLab GANG PRINT BEAT PZL p.11c Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 3DLab GANG PRINT BEAT PZL p.11c. 3DLab GANG PRINT BEAT PZL p.11c 19 pages. Polish fighter

Imprimer la page

3DLab GANG PRINT BEAT PZL p.11c Manuel de l'utilisateur

member of Group

LANDING GEAR STRUTS - SUSPENSION

Landing Gear Suspension System:

Insert the bowden cable (bent on the

template) into the part (53) and secure it

with a washer (54) and carefully glue it,

then insert it into the opening at the

bottom of the part (5). Then put on a

spring of diameter 10mm and lenght

45mm from the inside. Now secure the

assembly by gluing the part (55). Test if

the suspension system is functional and

then connect the bowden cable with the

landing gear strut (49-50) – this

assembled unit will be glued to the

fuselage part (6) later.